Kingston Technology ValueRAM 2GB DDR3L memory module 1 x 2 GB 1600 MHz
Brand:
Product family:
Product name:
GTIN (EAN/UPC):
Category:
Data-sheet quality:
created/standardized by Icecat
Product views:
357834
Info modified on:
14 Mar 2024, 17:57:44
Long product name Kingston Technology ValueRAM 2GB DDR3L memory module 1 x 2 GB 1600 MHz:
ValueRam
Kingston Technology ValueRAM 2GB DDR3L memory module 1 x 2 GB 1600 MHz:
Kingston Technology is the world's independent memory leader and is well-known for providing high quality memory products at an attractive price. Kingston ValueRAM is your best source for industry-standard memory to maximise the performance and productivity of your system. Built with A-grade components only, Kingston ValueRAM memory modules come with a lifetime warranty.
Short summary description Kingston Technology ValueRAM 2GB DDR3L memory module 1 x 2 GB 1600 MHz:
Kingston Technology ValueRAM 2GB DDR3L, 2 GB, 1 x 2 GB, DDR3L, 1600 MHz, 204-pin SO-DIMM, Green
Long summary description Kingston Technology ValueRAM 2GB DDR3L memory module 1 x 2 GB 1600 MHz:
Kingston Technology ValueRAM 2GB DDR3L. Component for: Laptop, Internal memory: 2 GB, Memory layout (modules x size): 1 x 2 GB, Internal memory type: DDR3L, Memory clock speed: 1600 MHz, Memory form factor: 204-pin SO-DIMM, CAS latency: 11, Product colour: Green
Bullet Points Kingston Technology ValueRAM 2GB DDR3L memory module 1 x 2 GB 1600 MHz:
- - JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply
- - VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
- - 800MHz fCK for 1600Mb/sec/pin
- - 8 independent internal bank
- - Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5
- - Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- - 8-bit pre-fetch
- - Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- - Bi-directional Differential Data Strobe
- - Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- - On Die Termination using ODT pin
- - Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- - Asynchronous Reset
- - PCB : Height 1.180” (30.00mm), single sided component